Would you like to know how to capture refrigerant gas spills in cans? Perused the article which discloses Industrialist Anil Jain’s approaches to capture refrigerant gas leaks as he is an aptitude in refrigerant space for quite a long while. Perused the article of Industrialist Anil Jain and get to be precautions and secure environment.


Refrigerant gasses are risk to the general public, if misused wrongly. For as far back as 5 to 6 decades, Chlorofluorocarbons (CFCs) are being utilized as refrigerants to make aerating and cooling and refrigerating impacts. As of late, it was distinguished that CFCs are the most damaging component of the earth. It is viewed as the major causative for ozone layer consumption adding to an unnatural weather change (nursery impact).

At present substantial amounts of CFCs filled refrigerant jars are utilized as a part of various cooling and refrigerating frameworks. In spite of the fact that the development of refrigerant happens in an encased cycle, spillages escape and influence the ozone layer. The most appalling actuality about the refrigerant gasses is that they have amazingly more environmental life. This demonstrates if CFCs are spilled in the earth, they might have a tendency to drain the ozone layer for the following 10 decades. Mr. Anil Jain, CEO of Refex Refrigerant Limited, works for ozone discretion in suggesting so as to spare the general public refrigerant release capturing procedures.

Anil Jain Gases Leak Detection Techniques

Any type of methods can be undertaken for both initial test and follow-up verification to cope strong professional judgment. The leak has to be identified and fixed as soon as possible to prevent environmental damage. Some of the simple tests to detect refrigerant leaks include:

  • A soap bubble test: If you suspect gas leakage, just pour soap solution on the unit. If bubbles are formed, the leakage is confirmed and necessary steps can be implemented to overcome the problem.
  • Electronic leak detectors: An electronic leak detector is a device that produces audio-visual signals when brought near the leakage area. Before the leak spreads all over, the refrigerant gas must be emptied at the easiest.
  • Ultrasonic leak detectors: An ultrasonic leak detector is a user-friendly, superior quality, sensitive device helping to detect air leaks through ultrasound. Such type of detector helps to identify the location of leak more precisely.
  • A pressure test: It involves filling the container with air and monitoring the increase or decrease in pressure for a specified time period. If pressure decreases, it denotes the presence of leak. Any cracks, split seams, holes, porosity or other conditions causing leaks can be detected by this method.
  • Other methods to detect include a vacuum test or fluorescent dye and black light test, an infrared test, and a near infrared (back scatter absorption gas imaging) test.

Anil Jain Arrest Measures: Simple and Mandatory

  1. Ensure that refrigerant cans are in good condition with caps to seal.
  2. Make sure that the caps fit properly to the can. If the cap seems to be loose fitting, immediately change the can at the earliest.
  3. Always store in a place specified by the manufacturer. Temperature places a major role in causing leakage of gas. If the can is to be stored in cool places, it must never be kept in place where the sunlight falls directly.
  4. Do not beat or drop the can at any cost.
  5. If the handling process involves technical advice, seek for it rather than experimenting.